Nederlands 
English SVA-2300
Product information
Discontinued item. Product no longer available from supplier. Please consider SV2A-2200 or SV2A-2300 as a replacement. Please note that SureServo components are not compatible with SureServo2 components. Each system must contain motors/drives/cables from only the same family. Mixing and matching families is not permitted.
SureServo drive
The SureServo drives can be configured for a wide range of command sources including analog torque, analog velocity, "step and direction" or "up and down" pulse position, quadrature encoder follower, and built-in motion controller with preset position, velocity, or torque.
Presets can be selected with discrete inputs or modified with the MODBUS serial interface.
Configuration and diagnostics of the servo drives can be accomplished with the integrated keypad/display or the easy-to-use SureServo Pro™ software on a Windows environment.
SVA-2300 specifics:
- 3kW Servo amplifier
- 230 VAC Main supply voltage (3-phase)
- 230 VAC Control supply voltage (1-phase 200-255 VAC)
- This drive is used for 2 kW and 3 kW medium inertia motors
Common features:
- Fully digital with up to 450 Hz velocity loop response
- Easy set-up and diagnostics with built-in keypad/display or SureServo Pro™ configuration software
- Tuning aids include inertia estimation and easy-tuning for up to 10 levels of response
- Five-in-one command options include:
- ± 10V torque or velocity command
- Pulse train or master encoder position command
(accepts line driver or open collector) with electronic gearing
- Built-in indexer for position control using 8 preset positions and/or position setpoint with serial Modbus
Specifications
- Quantity per product
- 1
- Short Description
3kW Servo drive, 230 VAC three phase. For 2kW and 3kW motors.
- Specifications
- Voltage Phase: Three-phase
- Voltage and Frequency Range: 70~255 VAC @ 50/60 Hz ±5%
- Main Circuit Input Current: 13.6A @ 3kW
- Main Circuit Inrush Current: 87A
- Permissible Frequency: 50/60 Hz ±5%
- Encoder Resolution / Feedback Resolution: 2500 lines / 10000 ppr
- Control of Main Circuit: SVPWM (Space Vector Pulse Width Modulation) Control
- Tuning Modes: Easy / Auto / Manual
- Dynamic Brake: Built-in control
- Analog Monitor Outputs (2): Monitor signal can be set by parameters (Output voltage range: ±8V)
- 8 Programmable Digital Inputs (45 selectable functions): Servo enable, Alarm reset, Gain switching, Pulse counter clear, Fault stop, CW/CCW over-travel, Internal parameter selection, Torque limit activation, Velocity limit activation, Control mode selection
- Scalable Encoder Output: Encoder signal output A, /A, B, /B, Z /Z, Line Driver
- 5 Programmable Outputs (9 selectable indicators): Servo ready, Servo On, Low velocity, Velocity reached, In Position, Torque limiting, Servo fault, Electromagnetic brake control, Home search completed
- Communication Interface: RS-232 / RS-485 / RS-422 / Modbus ASCII & RTU up to 115k Baud
- Protective Functions: Overcurrent, Overvoltage, Undervoltage, Overload, Excessive velocity/position error, Encoder error, Regeneration error, Communication error
- Installation Site: Indoor location (free from direct sunlight), no corrosive liquid and gas (far away from oil mist, flammable gas, dust)
- Altitude: 1000m above sea level - maximum
- Operating Temperature: 0 to 55°C (If operating temperature is above 50°C [131°F], forced cooling will be required). For long-term reliability, the ambient temperature of SureServo systems should be under 45°C (143°F).
- Storage Temperature: -20° to 65°C (-4° to 149°F)
- Humidity: 0 to 90% (non-condensing)
- Vibration: 9.81 m/s2 (1G) less than 20Hz, 5.88 m/s2 (0.6G) 20 to 50 Hz
- Protection: IP 20
- Agency Approvals: CE; UL listed (U.S. and Canada)
- Cooling System: Internal Cooling Fan
- Weight: 3.0 kg
Full specifications can be found on the Datasheet in the Downloads tab.