Nederlands 
English SVA-2040
Productinformatie
Discontinued item. Product no longer available from supplier. Please consider SV2A-2040 as a replacement. Please note that SureServo components are not compatible with SureServo2 components. Each system must contain motors/drives/cables from only the same family. Mixing and matching families is not permitted.
SureServo drive
The SureServo drives can be configured for a wide range of command sources including analog torque, analog velocity, "step and direction" or "up and down" pulse position, quadrature encoder follower, and built-in motion controller with preset position, velocity, or torque.
Presets can be selected with discrete inputs or modified with the MODBUS serial interface.
Configuration and diagnostics of the servo drives can be accomplished with the integrated keypad/display or the easy-to-use SureServo Pro™ software on a Windows environment.
SVA-2040 specifics:
- 400W Servo amplifier
- 230 VAC Main supply voltage
(3-phase: 170-255 VAC or 1-phase: 200 - 255 VAC) - 230 VAC Control supply voltage
(1-phase: 200-255 VAC) - This amplifier is used for the 100W, 200W, and 400W low inertia systems
Common features:
- Easy set-up and diagnostics with built-in keypad/display or SureServo Pro™ configuration software
- Tuning aids include inertia estimation and easy-tuning for up to 10 levels of response
- Five-in-one command options include:
- ± 10V torque or velocity command
- Fully digital with up to 450 Hz velocity loop response
- Pulse train or master encoder position command
(accepts line driver or open collector) with electronic gearing - Built-in indexer for position control using 8 preset positions and/or position setpoint with serial Modbus
Specifications
- Quantity per product
- 1
- Short Description
400W Servo drive, 230 VAC single/three phase. For 100W, 200W, and 400W motors.
- Specifications
- Voltage Phase: Single-phase or Three-phase
- Voltage and Frequency Range:
- 3-phase: 170~255 VAC @ 50/60 Hz ±5%
- 1-phase: 200~255 VAC @ 50/60 Hz ±5%
- Main Circuit Input Current:
- SinglePhase: 3.4A@400W
- Three Phase: 2.6A @ 400W
- Main Circuit Inrush Current: 44A
- Permissible Frequency: 50/60 Hz ±5%
- Encoder Resolution / Feedback Resolution: 2500 lines / 10000 ppr
- Control of Main Circuit: SVPWM (Space Vector Pulse Width Modulation) Control
- Tuning Modes: Easy / Auto / Manual
- Dynamic Brake: Built-in control
- Analog Monitor Outputs (2): Monitor signal can be set by parameters (Output voltage range: ±8V)
- 8 Programmable Digital Inputs (45 selectable functions): Servo enable, Alarm reset, Gain switching, Pulse counter clear, Fault stop, CW/CCW over-travel, Internal parameter selection, Torque limit activation, Velocity limit activation, Control mode selection
- Scalable Encoder Output: Encoder signal output A, /A, B, /B, Z /Z, Line Driver
- 5 Programmable Outputs (9 selectable indicators): Servo ready, Servo On, Low velocity, Velocity reached, In Position, Torque limiting, Servo fault, Electromagnetic brake control, Home search completed
- Communication Interface: RS-232 / RS-485 / RS-422 / Modbus ASCII & RTU up to 115k Baud
- Protective Functions: Overcurrent, Overvoltage, Undervoltage, Overload, Excessive velocity/position error, Encoder error, Regeneration error, Communication error
- Installation Site: Indoor location (free from direct sunlight), no corrosive liquid and gas (far away from oil mist, flammable gas, dust)
- Altitude: 1000m above sea level - maximum
- Operating Temperature: 0 to 55°C (If operating temperature is above 50°C [131°F], forced cooling will be required). For long-term reliability, the ambient temperature of SureServo systems should be under 45°C (143°F).
- Storage Temperature: -20° to 65°C (-4° to 149°F)
- Humidity: 0 to 90% (non-condensing)
- Vibration: 9.81 m/s2 (1G) less than 20Hz, 5.88 m/s2 (0.6G) 20 to 50 Hz
- Protection: IP 20
- Agency Approvals: CE; UL listed (U.S. and Canada)
- Cooling System: Natural Air Circulation
- Weight: 1.5 kg
Full specifications can be found on the Datasheet in the Downloads tab.