H2-ERM100

Specifications

Quantity per product

1

Short Description

Ethernet remote I/O master module 10/100 Base-T

Specifications

Specifications of the H2-ERM100:

• Each ERM module can support up to 16 additional H2-EBC systems, 16  Terminator I/O EBC systems, or  16 fully expanded H4-EBC systems. Of  course, combinations are fine, too.
• The ERM connects to your control network using Category 5 UTP cables  for cable runs up to 100 meters. Use repeaters to extend distances and  expand the number of nodes.
• The PLC, ERM and EBC slave modules work together to update the remote  I/O points. These three scan cycles are occurring at the same time, but  asynchronously. It is recommended that critical I/O points that must be  monitored every scan be placed in the CPU base.

Note: Module must be installed in a local base, with a D2-2xx or H2-DM1(E) in the CPU slot.

Note: Module is not supported by the D2-230 CPU